The Advantages of using
Dyna Beads Tyre Balancers
- Increase tyre life.
- Eliminate tyre vibration.
- No weights to corrode or damage expensive rims.
- No dusty, messy powders to deal with.
- No rebalancing required.
- No weights to fall off.
- Re-usable, won’t grind down.
- 100% solid, high-density Ceramic.
- Impervious to moisture, won’t clump.
- 100% environmentally friendly.
- Special air drying tools not necessary.
- Totally compatible with Nitrogen.
- Won’t damage or interfere with Cat’s Eye, pressure balancing or TPMS systems.
- Have a low coefficient of friction
and react quickly to balance changes. - Are over 150% heavier than powdered
media, 60% heavier than glass media. The smaller
the volume in your tyres, the more efficient the
product is.
FAQs
Question: If there’s moisture in my tyres, will it stop the beads from performing properly?
NO. You mean will it clump? Dyna Beads® are a perfectly round, uniform surface, very heavy, and won’t clump.
…and because they are 100% solid ceramic, they don’t rust!
Question: Do I have to remove my wheel weights?
Motorcycles, scooters, Yes. Most other vehicles, no. Many of our car and SUV customers have found that the addition of 2 – 3 ounces per tyre while retaining their wheel weights makes the vehicle ride much smoother than before, and eliminates most future balancing requirements. The typical application for this is Mercedes, Porsche, BMW’s, Corvettes, etc.
INNER LINE ABRASION
If you use another product right now, you are probably familiar with rubber dust in your tyre. This is not a good thing.
This rubber dust was your delicate inner liner before one of the abrasive materials at the left starting grinding it away.
Your inner liner has one main engineered purpose: to block internal air from permeating the rubber carcass. As the liner gets thinner, it may affect it’s ability to retain air.
If you look at the enlarged photographs, you can see why these materials are abrasive. They have many small, sharp, rough edges.
Because they aren’t round, they have to “slide” around the surface, and the sliding friction, coupled with the abrasive texture, simply eats away at your inner liner.
Rubber dust is another reason why filtered valve cores are recommended for tyres using abrasive products.
Now take a look at Dyna Beads.
There are no sharp edges, it’s extremely smooth, round, and solid ceramic. Dyna Beads “roll” around the inner liner, and won’t grind away your inner liner in the process.
Which product would you rather have against your inner liner?
HARDNESS
A balancing product that is nice and round with a smooth surface can only perform properly if it stays that way over many thousands of miles, especially important for Fleets.
An important feature of ceramic for use as a balancing media is the relative hardness. The harder the material, the longer it will maintain it’s original shape and effectiveness. Dyna Beads are 100% solid ceramic!